|V100 page 5-18|
Center and Cup Washer are
Zinc Plated and Gold Passivated Mild Steel
Stainless Steel Mesh
FOR LOADS OF:
77 to 1598 Pounds (35 to 725 kgf)
-94°F to +347°F (-70°C to +175°C)
Primarily developed for heavy-duty applications where severe shock forces are encountered, these mounts are especially recommended for vehicle and marine installations where there are high starting torques or reversals of loads. They are capable of withstanding compression loads as high as ten times the static loads and are used for isolating marine fans, mobile engines, generators, instrument consoles and general machine tools such as lathes, milling machines, slotters, broachers, etc.
• CORROSIVE ENVIRONMENT
• STAINLESS STEEL MESH
Although normally intended to be used in compression, they will accept accidental tensile loads. The mounts should be fixed to the floor for loads in excess of 220 lb. (99.8 kgf) or when working conditions require it. They will accept compressive loads at least five times the static load.
NOTE: Dimensions in ( ) are mm.
|ΔAn access hole is provided to be able to pin the center section for assembling the mounting bolt or to remove rusted bolt.
CLICK CATALOG NUMBER TO CHECK PRICE AND AVAILABILITY.