|V100 page 5-16|
Aluminum Alloy, Anodized
Brass, Tin Plated
Stainless Steel Spring and Mesh
FOR LOADS OF:
1.5 to 242 Pounds (0.7 to 110 kgf)
-94°F to +347°F (-70°C to +175°C)
3.53 - 4.41 oz. (100-125 g) approx.
• CORROSIVE ENVIRONMENT
• STAINLESS STEEL MESH
In accordance with curve 1 of spec MIL-C-172.
Ratio between transverse and axial stiffness (vertical): approximately 1:2.5.
Natural Frequency = 7 to 10 Hz vertical and 4.5 to 6 Hz transverse depending on load for a displacement
input of ± .030 (0.75).
Maximum displacement input ± .031 (0.8)
Conforms to MIL-E-5400C
Just prior to abutting snubber, load corresponding to a continuous acceleration of at least 2 G. Loads corresponding to at least 10 G may be accepted without subsequently affecting the mount performance.
Maximum displacement of the suspended unit
under limiting loads ± .236 (6).
NOTE: Dimensions in ( ) are mm.
*Long cap, unloaded height 1.76 (44.6) loaded height 1.61 (41), available on request.
L at end of Catalog Number stands for Long Cap type.
ΔTo be discontinued when present stock is depleted.
CLICK CATALOG NUMBER TO CHECK PRICE AND AVAILABILITY.