LEVELING MOUNTS
to 10000 lbs.
www.vibrationmounts.com Phone: 516.328.3662 FAX: 516.328.3365
Next Button
V100 page 3-3  
Leveling Mount • FOR COMPRESSION LOADS ONLY
• STAINLESS STEEL MESH
• CORROSIVE ENVIRONMENT
• FOR LOADS OF 100 TO 10000 POUNDS


CHARACTERISTICS:

The mounts consist of two rugged meehanite castings, a resilient pad of knitted stainless steel mesh and pressed steel baseplate. The leveling screw seats into the bottom casting thus providing a built-in leveling device. The excellent damping characteristics of this mount are unaffected by contaminants such as oil, grease or caustics.

INSTALLATION:
Raise the machine with conventional lifting devices; place the mounts beneath the machine feet and attach the leveling screws to the mount. Lower the machine and ensure that the total weight is carried by all of the mounts. Level to a desired height by gradual and sequential adjustment of the leveling screws. Tighten the locknut.
Leveling Mount Drawing
CAD Catalog Number Load Range A B C D
lb. kgf
CAD
CAD
CAD
CAD
CAD
V10Z25-0139-1
V10Z25-0139-2
V10Z25-0139-3
V10Z25-0139-4
V10Z25-0139-5
100–250
250–500
500–1000
1000–2000
2000–4000
45–113
113–227
227–454
454–907
907–1814
2
(50.8)
4-1/4
(108)
3-1/2
(89)
5/8-11 UNC
CAD
CAD
CAD
CAD
*V10Z25-0339
V10Z25-0339-1
V10Z25-0339-3
V10Z25-0339-5
1000–10000
1000–4000
4000–7000
7000–10000
454–4536
454–1814
1814–3175
3175–4536
 2-1/8
(54)
 7-45/64
(196)
 4-9/32
(109)
 1-8 UNC
NOTE: Dimensions in ( ) are mm.
*To be discontinued when present stock is depleted.

CLICK CATALOG NUMBER TO CHECK PRICE AND AVAILABILITY.