SQUARE MOUNTS
to 15.4 lbs.
www.vibrationmounts.com • Phone: 516.328.3662 • FAX: 516.328.3365
Next Button
V100 page 1-3  
FASTENER:
Steel, Zinc Plated
ISOLATOR:
Natural Rubber
FOR COMPRESSION LOADS OF:
6.6 to 15.4 Pounds (3 to 7 kgf)
FOR SHEAR LOADS OF:
4.4 to 9.9 Pounds (2 to 4.5 kgf)
AVAILABILITY NOTE:
Out of stock items and on hand quantities can change daily. Contact us for availability.
Phone: (516) 328-3662
Email: aacsupport@vibrationmounts.com

NOTE: Dimensions in ( ) are in mm.
CAD Catalog
Number
Mode Max.
Load
lb. (kgf)
Forcing Frequency in Cycles per Minute
1500 1750 2000 2250 2500 2750 3000 3600
Minimum Load for 81% Isolation lb. (kgf)
button V10Z 1-322A Compression 6.6 (3) - - - - - 5.4 (2.5) 4.5 (2) 3.2 (1.5) 
Shear 4.4 (2) 3.3 (1.5) 2.4 (1.1) 1.9 (0.9) 1.5 (0.7) 1.3 (0.6) 1.1 (0.5) * *
button V10Z 1-322B Compression 8.7 (4) - - - - - 8.5 (3.9) 6.9 (3.1) 4.8 (2.2)
Shear 5.5 (2.5) 4.8 (2.2) 3.6 (1.6) 2.8 (1.3) 2.2 (1) 1.9 (0.9) 1.6 (0.8) * *
button V10Z 1-322C Compression 12.0 (5.4) - - - - - - 11.5 (5.2) 8.0 (3.6)
Shear 7.8 (3.54) 7.7 (3.5) 6.0 (2.7) 4.9 (2.2) 4.0 (1.8) 3.5 (1.6) 3.1 (1.4) * *
button V10Z 1-322D Compression 15.4 (7) - - - - - - - 11.8 (5.4)
Shear 9.9 (4.5) - 8.2 (3.7) 6.7 (3) 5.6 (2.5) 4.7 (2.1) 4.1 (1.9) * *
*At these forcing frequencies, lesser loads will yield less than 81% isolation.
CLICK CATALOG NUMBER TO CHECK PRICE AND AVAILABILITY.



LOAD DEFLECTION GRAPHS:
Deflections below the line x–x are considered safe practice for static loads;
data above that line are useful for calculating deflections under dynamic loads.

NOTE:
Maximum unthreaded portion of stud does not exceed 1/16" (1.59 mm).